You want to make sure that you have both needle-nose pliers as well as flat nose pliers. When working with electronics you ideally will want two different sizes of pliers – the regular large ones and the miniature ones. These bits will also fit into an electric drill or electric screw gun. The nice thing about these is that the bits are pretty standard so you can continue to expand your collection as required. Instead you can get a multi-purpose screwdriver with interchangeable bits. Of course it isn’t necessary to buy individual screwdrivers for every type of screw head. They can also be used as regular Torx drivers. These look like ordinary Torx screwdrivers except they have a hole drilled down the center to accommodate the pin used on Security Torx screws. If you plan on servicing electronic devices you’ll eventually find that you need some Security Torx drivers. Torx screwdrivers and Allen keys are available in a variety of sizes and it’s a good idea to start with at least a T15 and T20 and then gradually expand your collection. In addition you will want to purchase some small Jewelers screwdrivers as many electronics devices use very tiny screws.Īnother popular type of screw head used in electronics is the Torx screw. You’ll want to get an assortment of screwdrivers, often you’ll find hardware stores sell a complete package that contain Robertson, Phillips and Slotted screwdrivers in a variety of sizes and this is an excellent way to get started. There are a myriad of hand tools that you can purchase for your electronics experimenting but in its most basic form they all boil down to the following screwdrivers pliers and wire cutters. You can buy most of these either online or at your local hardware store. Tools that will make the job easier without breaking the bank. So follow along as I go over some of the essential tools for your electronic workbench. Of course it is possible to spend several thousand dollars on this hobby, as it is on many hobbies, but when you’re just beginning you’ll usually want to try to keep that investment to a minimum. A few basic tools and pieces of test equipment are all that is really required to begin working with electronics. Electronics can be a fun and rewarding hobby and despite what you might think you don’t really need a laboratory full of expensive equipment to get into it.

Electronic workbench